top of page

SOUND ACCESSORIES

TX-FLEX Omni Gooseneck Microphone for Lectrosonics

TX-FLEX is a 6” Mini Gooseneck Omni Microphone with TA5F connector that plugs directly into a Lectrosonics wireless transmitter with “Servo-Bias” input. 

 

It is ideal for vehicle shots, podiums, courtrooms, press conferences and stealth placement to name a few. Made from a modified 6” Shure Microflex* and custom fitted with a TA5F connector. It is designed to be used only with Lectrosonics Servo-Bias inputs like SMa, SMV, SMQV, SMWB, SMDWB, SMB, SMDB, DBu, SPDR, UMa, LMa etc..

 

The Omnidirectional pickup of the TX-FLEX has remarkable reach and linear off-axis clarity.

TX-FLEX_2.png
TX-FLEX_1.png
TX-FLEX_3.png

FOAM WINDSCREENS

Foam_Group_1.png
12cm_FOAM_3.png

Eastwind Audio Microphone Foam Windscreens are engineered to protect the microphone against light wind and plosive pop noise. Made of long-lasting, premium open-cell acoustic foam. High-quality foam windshields offer reliable wind noise attenuation up to +/- 20 dB. The open-cell tech keeps high frequency loss to a minimum and provides resistance against moisture and UV light.

Models include Shotgun, Small Diaphragm, Handheld, Reporter and Lavalier microphones.

STICKY DISCS

Sticky Discs are 23mm round double-sided, hypoallergenic adhesive pads. Designed to attach lavalier microphones on talent in creative ways, e.g. directly on skin, hidden within clothing or on the surface of clothing. Often used on static surfaces as "plant-mics" too. The integral soft fabric between the two adhesive pads prevents the adhered mic from crackling from movement. Sticky Discs should be applied to a dry surface and will remain secure until removed and discarded.

  • Super sticky adhesive on both sides

  • Hypoallergenic

  • 23mm Round Pad, ideal for use with Concealers, e.g. DPA, Voice Technologies

  • Combine with our COVERS fur discs for wind protection outdoors

  • Combine with moleskin for preventing under clothing use rustle sounds

  • Combine with Rycote Undercovers/Overcovers, URSA Soft Circles

  • Sheets are 10-per and perforated between each 2 set of discs to tear-off

  • Made in USA

STICKY.png
STiKY_DISCS_8.png
STiKY_DISCS_7.png

COVERS LAVALIER FUR SHIELDS

COVERS Lavalier Fur Shields are engineered for providing quick & easy wind protection for Lavalier microphones worn outside of clothing. Perfectly suited for use in moderate windy conditions on lavalier mics outdoors.

 

Combine COVERS with our 23mm Round Sticky Discs to secure lavalier microphones with wind protection to clothing or directly on skin.

 

COVERS Lavalier Fur Shields come in packs of 30 or 100 Black or Gray color or a Multi Pack of 10 ea. Black, Grey and White.

Covers-Black_edited.jpg
Covers-Gray_edited.jpg
IMG_5140_edited.jpg
Covers-Black_Hand.png
Covers-Black_2.png

LAVALIER FOAM & FUR SHIELDS

Engineered for providing the best possible wind protection for Lavalier microphones worn on talent outdoors. Perfectly suited for use in windy conditions on lavalier mics that are attached to the outside of clothing. 

 

Combines a lavalier foam windscreen with an outer fur windshield providing a secure fit and professional quality wind protection. Creates a small dead-air cavity within the windshield to provide the desired result. In addition to reducing wind noise it will considerably minimize the noise from movement and clothing.

 

Lavalier Foam & Fur Shields come in Black or Gray color.

LAV-WJ_K_3_edited.jpg
IMG_5020.png
LAV-WJ_K_5.png

Stand Adaptor 5/8" to 3/8"

Our 5/8" F to 3/8" M knurled stand adaptor is precision machined from a solid brass rod to the highest tolerance specifications. The fitting is "smooth like butter" and will seamlessly mate with your typical 5/8" male threaded microphone stand to mount location sound shockmounts and windshields with a 3/8" threaded female socket.

  • Machined Brass

  • Premium black anodized finish

  • 5/8"-27 Female Thread

  • 3/8" Male thread

  • Made in Germany

5838_3.png

*Limited Edition* Professional "Blimp" basket type Windshield for maximum wind protection and handling isolation for select shotgun microphones.

 

Includes Windshield body, end caps, shockmount, Fur (synthetic) cover, boom mount swivel with 3/8" threaded socket, XLR Clamp, Low-Profile XLR-3 jumper cable.  

 

Sized to work perfectly with: SCHOEPS CMIT 5, SENNHEISER MKH 416, MKE 600, DPA 4017B, NEUMANN KMR 81i, RODE NTG3, SANKEN CS-2, CS-3e, DIETY S-Mic 2
 

Made in UK

IMG_5109_1.png

PWS-260-LE Professional Shotgun Windshield

*Limited Edition* Professional "Blimp" basket type Windshield for excellent wind protection and handling isolation for select shotgun microphones. Perfect for Run & Gun, sports and Doc work.  The "snap-fit" Windshield pods design allows for quick access to the microphone and for adjusting. No tools needs to move microphone isolators or cable clamp. *Limited Edition*

 

Includes Front and Back "snap-fit" Windshield pods, shockmount, Fur (synthetic) cover, boom mount swivel with 3/8" threaded socket, XLR Clamp, Low-Profile XLR-3 jumper cable.  

 

Sized to work perfectly with: SCHOEPS CMIT 5, SENNHEISER MKH 416, MKE 600, DPA 4017B, NEUMANN KMR 81i, RODE NTG3, SANKEN CS-2, CS-3e, DIETY S-Mic 2

*Windshield will accommodate other shotgun microphones up to 275mm in length, from 19 and 25mm in diameter.

Made in UK

PWS275_1_edited.jpg

PWS-275-LE Professional "Run & Gun" Shotgun Windshield

bottom of page